Відео

So....If you damage the ES mat on a Curio 2, I am not sure you can buy a replaced. I am not seeing one at the time of writing this comment....so it's not a bad idea to have a debris tray which won't be damage if something goes wrong.

I am so glad you have found the tutorials helpful! I keep meaning to make tutorial on the cover sheet, it's just vinyl I got from Hobby Lobby & drew the grid on it. It's been so helpful! I have never Calibrated any of my cutting machines, so I can't offer up much help there!

@@MissMaryEmbroidery what is the thickness of the clear vinyl you picked up at hobby lobby? Hopefully calibrating the curio 2 won’t be that difficult. Maybe silhouette website won’t cause any problems trying to calibrate. Maybe I’ll wait until they get their new website problems resolved. Don’t want added issues with our machines

I have a link in the description to the brand that I bought -- you can try that one. I struggled with another brand not shrinking uniformly before I changed brands.

I have never bought a Laser Cutter, I start researching them, get overwhelmed & then stopped looking!

What are you trying to cut with it? It’s not really an easy blade to work with & I rarely use it.

I use The Rhinestone World's plug in to make rhinestone templates but there are other programs out there too. But they are a bit tedious to make if I'm honest!!

I have not gotten that - what kind of wood are you working with? Could it be variations in the wood grain itself? Those are bamboo cutting boards, wonder if the cheaper wood works better!

You are so very welcome!

I used a power strip on my desk for the foil quill. According to the makers of the foil quill, you are not supposed to use a USB from a computer or the machines. You can also buy a USB battery bank if you don't have a USB port near by. Hope that helps!

@@MissMaryEmbroidery Thank you so much. I have a power bank that I can use. :)

It should work with glitter foam -- just remember that glitter is going to dull the blade quickly!

I adore the CB 09 blades. I have videos up on using them in the old & new Cameo machines. They take up setting up but it it's something you would be cutting a lot of, I highly recommend it!!

Thanks!! 🥰

I used liquid fusion on this project. I have a full detailed video on youtube -- ua-cam.com/video/of3shLbjbEI/v-deo.htmlsi=2Yul6d0Vuu9PInSd

@@MissMaryEmbroidery great thank u 😁😁

I am sorry, I know nothing about a mac!

Awesome! Glad it worked so well!!

I have never seen a difference between melting or not melting the adhesive & I choose to not stand over the hot heat press any more than I have too!

This made me so happy to read! These are one of my dorky projects I love but doesn't get a lot of views! I hope it worked out well for you!!

@@MissMaryEmbroidery Yes it did great. So again: Thank you so much

This is a scatter method of rhinestone placements. so wherever they fit is where they go. There are more fill pattern types for a more uniform look. Honestly not sure how long it takes the glue to dry, not that long. It varies based on how much you apply.

I have not -- not sure it's safe to heat up modpodge or if modpodge would shrink when heated. I do know that on printable shrink plastic you can skip it because the UV resin will stick to the shrink plastic.

I am so glad that it was helpful!! I adore this peep necklace!!

ua-cam.com/video/7X-EvBGUlL0/v-deo.html -- there's the link to the video on how I did this, step by step. Yes, the powder needs to go on while it's still wet. To flip in the image, you need to reflect it horizontally. In Silhouette Studio, you would right click on your image & select reflect horizontally to flip it.

Hope you enjoy it!!

Thank you!!

The chomas Marker holder (not pen holder) will hold a normal Sharpie marker. I am not sure if it'll work with the grips, they get hard for the screw to hold steady. You can see if the grip will come off & make it easier to hold on to. I hope that helps!

Thank you!!

It’s shown in the video, do you have a specific question?

No I don’t have a link to a specific Etsy shop.

The Link to the Pinks ducks on Amazon is below (It's an Affiliate link) amzn.to/49w1idq They are 2, 3, 4, & 5 mm Resin Rhinestones in AB Pink. I bought them from Etsy (BlingeeThingee) & mixed them together.

I've both but haven't tried it out yet..

I don’t own the silhouette heat pen, so I can really offer up an opinion.

I haven’t really had that problem - I would suggest trying to reduce the force used. Or the automatic depth detection can get off if the object is shiny, you try using white paper when it reads the depth. (I did that in my foil quill video). Or add more tape! Hope some of that helps!

No only the speciality tools can go in carriage two.

@@MissMaryEmbroidery I asked because Curio 2 and Cameo 5 has the new pen holder that goes into the second slot. Thanks for answering 😊

@ Ah good point!

Sounds like you are using a PNG or Jpeg file for your etching. If it is a picture file, you can trace it using the butterfly on the toolbar. Or you can try bringing in a SVG file. Once you either trace or bring in an SVG file, you would use the Emboss/Deboss panel to put the lines in needed for etching. Hope that helps!

@@MissMaryEmbroidery Thank you so much. I forgot that I had to trace it. Your suggestion just might do the trick!

It's on my list & they are on my table to try!!! I just haven't had a chance yet, past the ones that I showed in this video. I am hopeful that one of the 3rd party tools will work in carriage 1!

In theory but I would be very careful doing so -- the Cameo 4 only has a 3 mm clearance, so between the 2mm foam & the mat there isn't a lot of room.

Yes Cut with the auto blade -- the special blades are a pain in my opinion.

@MissMaryEmbroidery omg JUST saw this....thank you!!

Thank you for watching!

5 to 10 minutes maybe.....that's a rough guess I don't really remember!

Thank you for watching!

Thanks!! I have not Embossed on leather using the Curio 2.

Thank you!!

You totally can do this!! They are addictive!

I'm glad you liked the video! I used stickers that I bought off of amazon. You would use a different method if you were using a cutting machine to cut out your stickers. This is the silhouette cameo cutting machine, not a cricut - this method would only work with a silhouette, the cricut machine would have a different way of doing this.Hope that helps!

@@MissMaryEmbroidery thanks so much!!!

I'm so glad this video helped you!! it doesn't get a lotta love!